5 x 70mm Full Thread Gold Chipboard Screw – Countersunk Screw for Woodworking Projects

5 x 70mm Full Thread Gold Chipboard Screw

The 5 x 70mm Full Thread Gold Chipboard Screw is a countersunk chipboard screw designed for fastening applications where a 5mm diameter and 70mm length are required. It features a full-threaded shaft, sharp pointed tip, cross-shaped drive recess, countersunk head, and gold-coloured finish.

Product Overview

This screw combines a relatively long 70mm length with a 5mm diameter, making it a practical option for projects that call for an extended fastening reach.

Its full-thread design means the threaded portion extends along almost the entire shaft. The countersunk head is designed to sit more neatly into the material when properly installed, while the sharp pointed tip supports the screw’s fastening design.

The product is supplied as a Gold Chipboard Screw, giving buyers a straightforward product description to use when making enquiries or placing orders.

Key Product Specifications

The main specifications are:

• Product type: Chipboard Screw
• Size: 5 x 70mm
• Diameter: 5mm
• Length: 70mm
• Thread: Full Thread
• Head: Countersunk
• Tip: Sharp Pointed Tip
• Drive: Cross Recess
• Finish: Gold-Coloured

These specifications are important when selecting the screw because each feature describes part of the fastening configuration.

Understanding the 5 x 70mm Size

The 5 x 70mm measurement identifies the screw’s diameter and length.

The first measurement, 5mm, refers to the stated diameter. The second measurement, 70mm, refers to the stated length.

Why Screw Size Matters

Choosing the correct screw size is an important part of any fastening project.

A screw that is too short may not provide the required fastening reach for a particular application, while a screw that is longer than required may not be appropriate for the project. The correct choice should therefore be based on the actual requirements of the work.

For customers who specifically need a 5 x 70mm chipboard screw, the complete size should be confirmed before purchasing.

Extended 70mm Length

The 70mm length gives this screw an extended fastening reach compared with shorter screw options.

This makes the size relevant to projects where the specified screw length is 70mm. Buyers should still confirm that the 70mm length matches their project requirements before installation.

Full-Thread Design

One of the defining characteristics of this product is its full-threaded shaft.

The threaded section extends along almost the entire length of the screw rather than being limited to only part of the shaft.

What Full Thread Means

In simple terms, a full-thread screw has threading running along nearly the complete shaft.

This is useful information when comparing different screw configurations because not every screw has the same thread arrangement.

For customers ordering this product, the full-thread specification should be retained as part of the product description.

Why the Thread Specification Matters

When selecting screws, buyers should consider more than just length and diameter.

The thread configuration is also part of the screw’s design. If a project specification calls for a full-thread screw, selecting a different configuration without confirmation may result in the wrong product being purchased.

Countersunk Head Design

The 5 x 70mm Full Thread Gold Chipboard Screw features a countersunk head.

A countersunk head is designed to sit more neatly into the material when the screw is properly installed.

Why the Head Design Is Important

The head of a screw is an important part of its overall configuration.

For this product, the countersunk design provides a clear distinction from screws with other head shapes.

Customers replacing an existing screw or purchasing according to a project specification should confirm that a countersunk head is required before ordering.

Sharp Pointed Tip

The screw has a sharp pointed tip as part of its stated design.

The pointed end forms the leading part of the screw during installation.

This specification can be useful when identifying the product or comparing it with other screw designs that may have different tip configurations.

Cross Recess Drive

The screw features a cross-shaped drive recess.

This provides the drive interface for a compatible screwdriver or driver bit.

Choosing the Correct Driver

Using a compatible driver is important when installing screws.

Before starting work, confirm that the screwdriver or driver bit matches the cross-shaped recess.

A proper fit helps the installer work with the screw as intended and reduces the risk of using an unsuitable driving tool.

Gold-Coloured Finish

The screw has a gold-coloured finish.

The finish gives the product its distinctive appearance and forms part of its product identification.

Why Finish Can Matter to Buyers

The appearance of a fastening product can be relevant when screws are visible in a finished project.

However, the gold-coloured finish should not be treated as proof of a particular coating, corrosion rating, material composition, or environmental resistance because those specifications have not been provided for this product.

For purchasing purposes, the confirmed description is simply gold-coloured finish.

What Are Chipboard Screws?

Chipboard screws are a category of fastening screws identified by the product name.

The term is commonly used when customers are searching for screws for woodworking and related fastening requirements. However, the exact suitability of any screw depends on the requirements of the particular project.

For this product, buyers have a clearly defined configuration:

5 x 70mm Full Thread Gold Chipboard Screw

That description communicates the screw type, size, thread configuration, and finish.

Who Can Use This Screw?

The product may be relevant to customers purchasing screws for woodworking and fastening projects, including:

• Carpenters
• Furniture makers
• Woodworkers
• Contractors
• Technicians
• Workshops
• Construction-related businesses
• Hardware buyers
• DIY customers
• Commercial purchasers
• Customers requiring screws in larger quantities

The appropriate use should always be determined according to the requirements of the specific project.

Choosing the Right Chipboard Screw

When customers search for the best chipboard screws, the right choice should not be determined by the product name alone.

Different projects can require different screw sizes and configurations.

Check the Size

Start by confirming the required diameter and length.

For this product:

• Diameter: 5mm
• Length: 70mm

If the project requires another size, a different screw should be considered rather than assuming that 5 x 70mm will be suitable.

Check the Thread

This product has a full-threaded shaft.

If the required specification calls for a different thread configuration, confirm the requirement before purchasing.

Check the Head

This product has a countersunk head.

Make sure the project requires this type of head before ordering.

Check the Drive

The screw uses a cross-shaped drive recess.

A compatible screwdriver or driver bit should be used for installation.

Chipboard Screws vs Wood Screws

Customers often search for chipboard screws vs wood screws when deciding which fastening product to purchase.

The names identify different product categories, but a comparison should be based on the actual requirements of the project rather than assuming that every screw can be substituted for another.

For this product, the confirmed specifications are:

• Chipboard screw
• 5mm diameter
• 70mm length
• Full thread
• Countersunk head
• Sharp pointed tip
• Cross recess
• Gold-coloured finish

If a project specification calls for another screw type, the buyer should confirm compatibility before changing products.

Chipboard Screws vs Drywall Screws

Another common search is chipboard screws vs drywall screws.

These are different product descriptions and should not automatically be treated as interchangeable.

If a project specifically calls for a 5 x 70mm full-thread chipboard screw, buyers should confirm that requirement rather than selecting a different screw simply because it has a similar appearance or size.

Avoid Choosing by Appearance Alone

Two screws can look similar while having different specifications.

For accurate purchasing, compare:

1. Screw type
2. Diameter
3. Length
4. Thread configuration
5. Head design
6. Drive type
7. Any other stated project requirement

This approach is particularly useful when purchasing for professional or commercial work.

Types of Screws and What to Check

Customers searching for types of screws may encounter many different options.

The important point is that screws should be selected according to the requirements of the work rather than by general appearance.

For this product, the defining characteristics are:

• Chipboard screw type
• 5 x 70mm size
• Full thread
• Countersunk head
• Sharp pointed tip
• Cross recess
• Gold-coloured finish

These details provide a useful reference when ordering or comparing products.

Practical Buying Considerations

Before purchasing the 5 x 70mm Full Thread Gold Chipboard Screw, consider the exact requirements of your project.

Confirm the Required Length

Make sure 70mm is the required length.

Confirm the Diameter

Make sure the required diameter is 5mm.

Confirm the Thread

Confirm whether the project requires a full-thread screw.

Confirm the Head

This product has a countersunk head, so confirm that this configuration matches the requirement.

Confirm the Drive

The product uses a cross-shaped drive recess. Make sure the available screwdriver or driver bit is compatible.

Confirm Quantity

Individual customers may require a smaller quantity, while workshops, contractors, retailers, and businesses may require larger quantities.

Providing the required quantity when making an enquiry makes purchasing more straightforward.

Common Mistakes When Buying Screws

Choosing the Wrong Size

A common purchasing mistake is focusing only on the screw type while overlooking the size.

Always check both the diameter and length.

Confusing Different Screw Types

Chipboard screws, drywall screws, and other screw categories should not automatically be treated as interchangeable.

Confirm the actual requirement before substituting another product.

Ignoring the Thread Configuration

A full-thread screw is different from a screw with another thread arrangement.

If full thread is required, confirm it before purchasing.

Choosing Without Checking the Head

Head design is another important specification.

This product has a countersunk head, so customers should check that this is appropriate for their requirement.

Buying Based on Colour

The gold-coloured finish is part of this product’s description, but colour alone should not be used to determine technical suitability.

The complete specification should always be considered.

Using the Product for Project Planning

For contractors, workshops, and commercial buyers, keeping the product specification in purchasing records can make repeat orders easier.

Instead of recording only “screws,” the product can be listed as:

5 x 70mm Full Thread Gold Chipboard Screw

This gives the purchasing team a more precise reference.

Information to Include in a Purchase Request

A clear request can include:

• Product name
• Size
• Thread type
• Head type
• Quantity required

For this product, the key information is 5 x 70mm, full thread, countersunk head, gold-coloured finish.

Buying Chipboard Screws in Ghana

Customers searching for chipboard screws price in Ghana can contact CETECH Ghana for current pricing and availability.

Prices can depend on the specific product and purchasing quantity, so buyers should provide the exact product description when requesting a quotation.

Online Ordering

Customers who already know the required screw can make an online enquiry using the complete product name and specification.

For example:

5 x 70mm Full Thread Gold Chipboard Screw — required quantity

This gives the supplier a clear starting point for the enquiry.

Offline Availability

CETECH Ghana also operates physical offline stores in Ghana.

Customers who prefer in-person purchasing can enquire about the product through the available store channels.

Bulk Chipboard Screw Supply

CETECH Ghana serves individual customers as well as businesses, contractors, technicians, institutions, commercial buyers, and industrial buyers where relevant.

Customers requiring larger quantities can make a bulk supply enquiry.

What Bulk Buyers Should Provide

For a larger order, provide:

• Product name
• Size
• Thread configuration
• Head type
• Quantity required
• Any specific project requirement

This helps create a clear purchasing request.

Sourcing Support

Where a particular quantity or purchasing requirement needs additional sourcing discussion, customers can communicate their requirements to CETECH Ghana.

The complete product description should be included so that the enquiry is as precise as possible.

Why Product Identification Matters

Fasteners can be available in many sizes and configurations.

A buyer asking for “chipboard screws” without specifying the required size may not communicate the full requirement.

For this product, the complete identification is:

5 x 70mm Full Thread Gold Chipboard Screw

The more specific description helps distinguish this screw from other chipboard screws.

Frequently Asked Questions

What size is this chipboard screw?

The screw is 5 x 70mm, with a stated diameter of 5mm and length of 70mm.

Is the screw full thread?

Yes. It is specified as a full-thread chipboard screw.

Does it have a countersunk head?

Yes. The product has a countersunk head.

What type of tip does it have?

The screw has a sharp pointed tip.

What type of drive does it use?

It has a cross-shaped drive recess designed for use with a compatible screwdriver or driver bit.

What colour is the screw?

The screw has a gold-coloured finish.

Are these chipboard screws?

Yes. The product is identified as a 5 x 70mm Full Thread Gold Chipboard Screw.

Are chipboard screws the same as drywall screws?

They are different screw categories. Whether one can be substituted for another depends on the requirements of the particular project.

Are chipboard screws the same as wood screws?

The terms identify different screw categories. Buyers should compare the actual specifications and project requirements before selecting a substitute.

Where can I buy chipboard screws in Ghana?

Customers can enquire about the 5 x 70mm Full Thread Gold Chipboard Screw through CETECH Ghana’s online and physical store channels, subject to availability.

Can I buy these screws in bulk?

Yes. CETECH Ghana supports bulk supply enquiries for customers requiring larger quantities.

How much do chipboard screws cost?

The current price should be confirmed with CETECH Ghana because pricing can vary according to the product and purchasing requirements.

Final Buying Checklist

Before purchasing the 5 x 70mm Full Thread Gold Chipboard Screw, confirm:

• Type: Chipboard Screw
• Diameter: 5mm
• Length: 70mm
• Thread: Full Thread
• Head: Countersunk
• Tip: Sharp Pointed Tip
• Drive: Cross Recess
• Finish: Gold-Coloured
• Quantity required
• Project requirements
• Current price and availability

For commercial or bulk purchasing, provide the complete specification when contacting CETECH Ghana.

5 x 70mm Full Thread Gold Chipboard Screw from CETECH Ghana

The 5 x 70mm Full Thread Gold Chipboard Screw combines a 5mm diameter, 70mm length, full-threaded shaft, countersunk head, sharp pointed tip, cross-shaped drive recess, and gold-coloured finish in one clearly defined screw configuration.

It is available for customers in Ghana looking for this specific chipboard screw specification for their fastening requirements. CETECH Ghana supports individual purchases as well as enquiries from contractors, workshops, businesses, commercial buyers, and customers requiring larger quantities.

When requesting the product, use the complete description 5 x 70mm Full Thread Gold Chipboard Screw and state the quantity required.