1.0mm ASAHI Solder Wire 60/40 – 200g Solder Wire for Electronics, Electrical Work and Workshops

1.0mm ASAHI Solder Wire 60/40 – 200g Flux-Cored Solder for Electronics and Electrical Repairs

The 1.0mm ASAHI Solder Wire 60/40 is a 200-gram solder wire designed for soldering work where a controlled 1.0-millimeter wire diameter is useful. The product is marked Alloy 60/40, DIA 1.0mm, Flux Code CF-10, WGC0810, and JIS Z-3283, making it a practical option for electronics, electrical repairs, workshops, technicians and general soldering applications where compatible soldering equipment is used.

The spool contains 200 grams of solder wire and is marked ASAHI SOLDER, with the product label identifying it as a Rosin Activated Core Wire. The packaging also identifies the wire diameter as 1.0 millimeter and the alloy as 60/40.

What Is Solder Wire?

Solder wire is a metal joining material used to create a connection between compatible components or conductive surfaces. During soldering, the wire is heated with an appropriate soldering tool until the solder melts and flows onto the prepared joint.

Once the solder cools and solidifies, it forms the soldered connection.

Solder wire is commonly used by:

• Electronics technicians
• Electrical technicians
• Appliance repairers
• Radio and electronics repair workshops
• DIY users
• Maintenance technicians
• Electrical and electronics students
• Hobbyists
• General repair workshops

The exact suitability of a solder depends on the materials being joined, the soldering equipment, the required joint characteristics and the applicable working procedure.

What Does 1.0mm Solder Wire Mean?

The 1.0mm specification refers to the diameter of the solder wire.

A 1.0-millimeter wire provides a useful middle-ground size for many general soldering tasks. Compared with very fine solder wire, a 1.0-millimeter diameter provides a larger amount of solder per unit length. Compared with substantially thicker solder wire, it can provide more controlled feeding for smaller joints.

This makes wire diameter an important consideration when selecting solder.

For example, a technician working on a relatively small electronic connection may want greater control over how much solder is introduced to the joint. The correct technique and soldering iron tip also have a major influence on the result.

What Does 60/40 Mean?

The product packaging identifies the alloy as 60/40.

The supplied product information does not separately spell out the constituent metals represented by the 60/40 designation, so the product should be identified according to the manufacturer’s stated 60/40 alloy specification rather than adding an unsupported composition claim.

For purchasing purposes, the 60/40 specification is one of the key identifiers that distinguishes this solder wire from other solder formulations.

Customers searching for terms such as 63/37 solder wire, lead free solder wire, or other solder alloy specifications should not assume that they are interchangeable with this product. Different alloy specifications can have different working characteristics.

What Is Flux-Cored Solder Wire?

The product packaging identifies the wire as Rosin Activated Core Wire and specifies Flux Code CF-10.

Flux is important during soldering because it assists the soldering process by helping prepare the surfaces for solder flow.

A flux-cored solder wire incorporates the flux within the solder wire itself, meaning the user does not necessarily have to feed separate flux onto every joint in the same way they would when using plain solder wire.

This can make soldering more convenient and allows the solder and flux to be introduced together as the wire is fed into the heated joint.

The presence of a flux core does not remove the need for proper surface preparation or correct soldering technique.

Understanding the CF-10 Flux Code

The product label identifies the Flux Code as CF-10.

This is an important product identification detail when purchasing replacement solder or comparing different solder wires.

If a technician requires a particular flux specification, the flux code should be checked against the requirements of the application and equipment rather than selecting a solder based solely on the wire diameter.

Two solder wires can both be 1.0 millimeter in diameter while having different alloy and flux specifications.

JIS Z-3283 Specification

The product packaging is marked JIS Z-3283.

This marking is part of the product’s stated specification and provides an additional identification point for customers comparing solder products.

When purchasing solder wire for a technical application, it is useful to consider the complete product specification rather than looking only at the diameter.

For this ASAHI solder wire, the important identifying details include:

• Brand: ASAHI SOLDER
• Alloy: 60/40
• Diameter: 1.0 millimeter
• Flux code: CF-10
• Product code: WGC0810
• Standard marking: JIS Z-3283
• Net weight: 200 grams
• Flux-core description: Rosin Activated Core Wire
• Lot number shown on the supplied packaging: 62324

Why the 1.0mm Diameter Matters

The diameter of solder wire affects how much solder is delivered when the wire is fed into a joint.

A thicker wire generally supplies more solder per unit length, while a thinner wire can allow more precise control for small joints.

The 1.0-millimeter diameter of this ASAHI solder wire makes it a useful specification to consider for general soldering tasks where a moderate wire size is appropriate.

However, the correct diameter should always be selected according to the size of the joint and the amount of solder required.

Using too much solder can create an untidy joint or unwanted connections between closely positioned conductive areas. Using too little solder can result in an incomplete joint.

Good soldering is therefore not simply about choosing the right wire. It also requires appropriate temperature, technique, surface preparation and solder quantity.

Solder Wire for Electronics

Solder wire is widely associated with electronics repair because electronic assemblies often contain small conductive connections that require controlled joining.

The 1.0-millimeter diameter can be considered for suitable electronics work, particularly where the joint size and equipment make this wire diameter appropriate.

Potential applications include suitable:

• Electronic repair work
• Circuit-related repair
• Component connections
• Wiring repairs
• Appliance repairs
• Workshop maintenance
• General electrical and electronic soldering

The suitability of the particular alloy and flux specification should always be considered for sensitive or specialized electronics.

Solder Wire for Electrical Repairs

Solder wire can also be used for suitable electrical repair work.

Technicians may use solder when joining compatible wires, terminals or electrical components where a soldered connection is an appropriate method.

However, soldering should not automatically be substituted for a mechanical or approved electrical connection simply because solder is available.

The correct joining method depends on the equipment, application, electrical requirements and relevant installation practices.

Solder Wire and Flux

A common customer search is solder wire and flux.

With this ASAHI product, the packaging identifies the wire as Rosin Activated Core Wire and specifies CF-10 as the flux code.

This means the product should be understood as a flux-cored solder wire rather than simply a bare metal solder wire.

The integrated flux is particularly convenient for routine soldering because the solder and flux are supplied together in the wire.

However, additional flux may sometimes be required depending on the material, contamination, joint condition or particular soldering process. Whether additional flux is appropriate should be determined according to the application and manufacturer’s guidance.

What Can I Use Instead of Solder Wire?

Customers sometimes search for what can I use instead of solder wire.

There is no universal substitute because the appropriate joining method depends on what is being connected and what the finished connection needs to achieve.

Possible joining methods in different situations can include:

• Mechanical terminals
• Crimp connections
• Approved connectors
• Conductive joining methods
• Other solder formulations

However, these methods are not automatically equivalent.

If a repair or assembly specifically requires soldering, using the correct solder wire is generally preferable to improvising with an unsuitable material.

Materials that melt at the wrong temperature, contain unsuitable contaminants or do not form an appropriate joint can produce poor results.

No-Clean Solder Wire vs Flux-Cored Solder

No-clean solder wire is another common search term.

The supplied ASAHI product is identified as Rosin Activated Core Wire with CF-10 flux, but the supplied information does not identify it specifically as a no-clean solder wire.

Therefore, customers requiring a specifically no-clean formulation should verify the manufacturer’s documentation before choosing this product.

This distinction is important because “flux-cored” and “no-clean” describe different aspects of a soldering product.

1mm Solder Wire for Workshops

A 200-gram spool can be useful for technicians and workshops that regularly perform soldering work.

The spool format allows the solder wire to be stored and fed from a single roll rather than using multiple short lengths.

Potential users include:

• Electronics repair shops
• Electrical workshops
• Appliance technicians
• Maintenance departments
• Technical training workshops
• DIY workbenches
• Small manufacturing operations
• General repair businesses

For businesses that use solder frequently, purchasing consistent specifications can also make stock management easier.

Choosing the Right Solder Wire

When selecting solder wire, do not look at diameter alone.

Consider the following specifications:

Diameter

This product is 1.0 millimeter in diameter.

Choose the diameter according to the size of the joint and the amount of solder you need to control.

Alloy

This product is marked 60/40.

Make sure the alloy specification matches the requirements of the application.

Flux

This product is marked CF-10 and identified as Rosin Activated Core Wire.

The flux specification can be important, particularly for technicians working with specific materials or processes.

Weight

The product has a 200-gram net weight.

This is useful when estimating stock requirements or purchasing solder for a workshop.

Standard or Product Specification

The package is marked JIS Z-3283, along with product code WGC0810.

These identifiers can help customers and procurement teams confirm that they are purchasing the intended product.

Common Mistakes When Using Solder Wire

Using Too Much Solder

More solder does not automatically mean a stronger or better connection.

The goal is to use an appropriate amount for the joint.

Using an Unsuitable Tip

The soldering iron tip should be appropriate for the work being performed. An unsuitable tip can make heat transfer and solder control more difficult.

Poor Surface Preparation

Dirt, oxidation or contamination can interfere with solder flow and joint quality.

Surfaces should be prepared appropriately before soldering.

Choosing Solder Only by Diameter

A 1.0-millimeter diameter tells you the wire size, but it does not tell you everything about the solder.

The alloy and flux specifications are also important.

Assuming Every Solder Is Lead-Free

Customers specifically looking for lead free solder wire should verify the alloy composition from the manufacturer’s documentation.

The supplied product is marked 60/40, but the provided product information does not explicitly state “lead-free.”

General Handling Considerations

Soldering involves heated tools and molten solder, so appropriate workshop precautions should be followed.

General good practice includes:

• Work in a suitable, well-ventilated area.
• Avoid touching molten solder or heated tools.
• Use appropriate eye protection where required.
• Keep flammable materials away from the heated work area.
• Wash hands after handling soldering materials.
• Follow the product manufacturer’s safety and handling instructions.
• Store the spool appropriately when it is not being used.

Because the supplied product information does not provide a complete safety data sheet, users should consult the manufacturer’s current safety documentation for detailed chemical, exposure and disposal requirements.

Buying Solder Wire in Ghana

For technicians and businesses in Ghana, having the correct solder specification readily available can reduce interruptions during repair and maintenance work.

The 1.0mm ASAHI Solder Wire 60/40, 200g is relevant to customers searching for:

• Solder wire
• 1mm solder wire
• Flux cored solder wire
• Core solder wire
• Solder wire for electronics
• Solder wire for electrical repairs
• ASAHI solder
• 60/40 solder wire
• 200g solder wire

Customers can use the product specifications to determine whether this particular solder matches their application.

Bulk Solder Wire Supply for Workshops and Businesses

Businesses that regularly perform electrical or electronic repairs may need solder wire as a recurring consumable.

Bulk purchasing can be useful for:

• Electronics workshops
• Electrical contractors
• Appliance repair businesses
• Technical schools
• Maintenance departments
• Manufacturing operations
• Industrial procurement teams
• Resellers

For bulk requirements, buyers can enquire with CETECH Ghana about available quantities and supply arrangements.

Why Buy from CETECH Ghana?

CETECH Ghana supplies products to individual customers, technicians, businesses, contractors and commercial buyers.

For customers purchasing solder wire, this can be useful when they need to source not only individual workshop consumables but also other tools, hardware, electrical and technical products for a project or business.

Customers can enquire about:

• Product availability
• Current pricing
• Bulk quantities
• Related products
• Product sourcing
• Online ordering
• Offline purchasing

CETECH Ghana operates both online and offline stores in Ghana, giving customers flexibility in how they purchase their products.

Frequently Asked Questions

What is this solder wire?

It is ASAHI Solder Wire marked as 60/40 alloy, with a 1.0-millimeter diameter, CF-10 flux code, and a 200-gram net weight.

What diameter is the solder?

The diameter is 1.0 millimeter.

How much solder is in the spool?

The net weight is 200 grams

Is it flux-cored?

Yes. The packaging identifies it as Rosin Activated Core Wire and gives the flux code as CF-10.

What alloy is it?

The packaging identifies the alloy as 60/40.

Is this 63/37 solder wire?

No. The product shown is marked 60/40, not 63/37.

Is it no-clean solder wire?

The supplied product information does not identify it as no-clean solder. It identifies the wire as Rosin Activated Core Wire with CF-10 flux.

Is it lead-free solder wire?

The supplied product information does not explicitly state that it is lead-free. Customers requiring lead-free solder should verify the manufacturer’s composition documentation before purchase.

What is the product code?

The packaging shows WGC0810.

What standard is shown on the packaging?

The packaging is marked JIS Z-3283.

Product Specifications

Specification	Details
Brand	ASAHI SOLDER
Product	Solder Wire
Alloy	60/40
Diameter	1.0 Millimeter
Flux Type/Description	Rosin Activated Core Wire
Flux Code	CF-10
Product Code	WGC0810
Standard Marking	JIS Z-3283
Net Weight	200 Grams
Lot Number Shown	62324

The specifications above are taken from the supplied product packaging and product details.

Final Buyer Checklist

Before purchasing solder wire, confirm:

• The required wire diameter.
• The required alloy specification.
• Whether flux-cored solder is required.
• The appropriate flux specification.
• The required spool weight.
• Compatibility with the intended soldering application.
• Whether a lead-free formulation is specifically required.
• Whether a no-clean formulation is specifically required.
• Whether the product’s stated specification matches your technical requirements.

For customers looking for 1.0mm ASAHI Solder Wire 60/40 in Ghana, this 200-gram spool provides a clearly identified solder wire specification for suitable soldering applications.

CETECH Ghana can assist customers with product enquiries, online ordering, offline purchasing and bulk supply requirements through cetechbpa.com.