4.5″ FINDER MX Series Diamond Blade (Concrete / Stone Cutting Disc) – 115mm Cutting Disc for Dry Cutting

FINDER MX Series Diamond Blade – 115mm Concrete / Stone Cutting Disc

The FINDER MX Series Diamond Blade is a 115mm diamond blade identified on its packaging with a 22.23mm bore, Dry cutting designation, and a stated speed of 13,200 rpm. It is also supplied under the common customer name Concrete / Stone cutting disc.

For customers in Ghana sourcing this type of cutting disc, the most important step is to match the product’s stated specifications with the requirements of the intended equipment and project.

Product Overview

The product is identified on its packaging as the FINDER MX Series Diamond Blade.

The packaging provides the following information:

• Brand: FINDER
• Series: MX Series
• Product: Diamond Blade
• Size: 115mm
• Bore: 22.23mm
• Cutting designation: Dry
• Stated speed: 13,200 rpm
• Material stated on packaging: Diamond
• Origin: Made in China

The product is also supplied using the common/local name Concrete / Stone cutting disc.

These details provide the main information customers can use when identifying the product and comparing it with their project requirements.

115mm Diamond Blade

The packaging identifies the blade as 115mm.

This is an important specification when purchasing a replacement or sourcing a cutting disc for a particular piece of equipment. Customers should confirm the required blade size before ordering rather than selecting a product based only on the general description of a diamond blade.

If your project specifically requires a 115mm blade, this stated dimension can be used when making an enquiry with CETECH Ghana.

22.23mm Bore

The packaging also identifies the product with a 22.23mm measurement.

This specification should be checked when purchasing because the required bore is an important part of identifying the correct cutting disc for an intended setup.

If you are replacing an existing blade and are uncertain about the required bore, confirm the requirement before purchasing.

Dry Cutting Designation

The packaging clearly identifies the product as Dry.

This provides a specific product detail for customers looking for a diamond blade with a dry cutting designation.

The available product information does not provide detailed operating instructions or explain every condition under which the blade should be used. Therefore, customers should not assume additional operating requirements that are not stated.

Stated Speed of 13,200 rpm

The packaging states 13,200 rpm.

This is part of the product information that should be considered when comparing the blade with the requirements of the equipment being used.

Customers should confirm that the product specifications are appropriate for their particular equipment before use.

Understanding the Product Specifications

The specifications on the packaging provide a straightforward way to identify this particular blade.

Product Identification

When enquiring about the item, customers can identify it as:

FINDER MX Series Diamond Blade – 115mm, 22.23mm bore, Dry, 13,200 rpm.

Providing these details can help reduce confusion where several cutting discs are available.

Material Stated on the Packaging

The packaging states Material: Diamond.

This information forms part of the product identification supplied by the manufacturer on the packaging.

No additional material composition or construction details are provided in the available product information, so those details should not be assumed.

Made in China

The packaging states Made in China.

This is part of the product information displayed on the packaging and can be used when identifying the product.

Concrete / Stone Cutting Disc

Concrete / Stone cutting disc is the common/local name supplied for this product.

Customers may use this term when asking for the product in a physical store or searching for it online.

Using both the product name and its specifications can make an enquiry more precise. For example, a customer can ask for the FINDER MX Series 115mm Diamond Blade with a 22.23mm bore.

This is more specific than simply requesting a diamond disc because it identifies the particular product specifications.

Why Product Identification Matters

Different cutting discs can have different sizes and specifications.

When purchasing a replacement or sourcing products for a project, customers should therefore check the information required for their particular application instead of assuming that every diamond blade is interchangeable.

For this product, the key identifying details are:

• FINDER
• MX Series
• Diamond Blade
• 115mm
• 22.23mm
• Dry
• 13,200 rpm

Choosing the Right Cutting Disc

Selecting a cutting disc should start with the requirements of the job and equipment.

Check the Size

The FINDER MX Series blade is identified as 115mm.

If your project requires a particular blade size, confirm that 115mm is the required specification before purchasing.

This is especially important when replacing an existing disc.

Check the Bore

The stated bore is 22.23mm.

Check the required bore before ordering, particularly if you are sourcing a replacement blade.

If you are uncertain, consult the person responsible for the equipment or cutting work.

Check the Cutting Designation

This product is marked Dry.

Customers looking for a product with this designation should take this information into account when comparing options.

Check the Stated Speed

The packaging gives a stated speed of 13,200 rpm.

This information should be checked against the requirements of the equipment before use.

Confirm the Product

Before placing an order, compare the product name and specifications with what your project requires.

A product should not be selected solely because it is described as a diamond blade.

Who May Need the FINDER MX Series Diamond Blade?

The product may be relevant to customers who have identified a requirement for a diamond blade matching the specifications provided.

Potential buyers include:

• Contractors
• Technicians
• Tradespeople
• Construction businesses
• Maintenance teams
• Workshops
• Individual customers
• Commercial buyers
• Businesses sourcing cutting accessories

The product may also be relevant to customers who specifically require a 115mm diamond blade or a blade with a 22.23mm bore.

Contractors

Contractors may purchase cutting accessories as part of a larger project.

Before ordering several units, it is useful to confirm the required size, bore, cutting designation, and stated speed against the project requirements.

For bulk procurement, the exact quantity should also be established before making the order.

Technicians

Technicians may need replacement cutting discs when working on different projects.

Providing the supplier with the product name and specifications can make it easier to identify the required item.

For this product, the main identifying information is the FINDER MX Series, 115mm size, 22.23mm bore, Dry designation, and 13,200 rpm stated speed.

Individual Customers

Individual customers may need a cutting disc for a particular project.

If you are not certain which blade specification is required, confirm the requirement before purchasing.

Diamond Blade for Grinder Searches

Customers may search online using phrases such as diamond blade for grinder, diamond blade for angle grinder, or diamond disc for grinder.

These phrases can be useful when searching for products, but the available information for this particular item does not specify a particular grinder model or explicitly establish compatibility with a particular machine.

Therefore, customers should confirm equipment compatibility before purchasing or using the blade.

Why Compatibility Should Be Confirmed

A cutting disc’s product description alone does not necessarily provide every detail required to determine whether it is appropriate for a specific machine.

When sourcing a replacement, provide the equipment information and the product specifications available to you.

If you already know that your project requires a 115mm blade with a 22.23mm bore, those details can be included in your enquiry.

Buying the Product for a Project

A good purchasing process begins with identifying the exact requirements.

Step 1: Identify the Required Blade

Determine whether the project requires the FINDER MX Series Diamond Blade or another specification.

Step 2: Confirm the Size

The product is 115mm.

Make sure this matches the required blade size.

Step 3: Confirm the Bore

The product has a stated 22.23mm bore.

Confirm that this matches the requirement of the intended equipment.

Step 4: Check the Cutting Designation

The packaging identifies the blade as Dry.

Make sure this matches the requirement of your project.

Step 5: Check the Stated Speed

The packaging states 13,200 rpm.

Consider this specification when checking the product against the equipment requirements.

Step 6: Confirm Quantity

Determine how many units are needed before placing an order, particularly for a larger project.

Common Buying Mistakes

Buying Only by the Product Category

Searching for “diamond blade” provides a broad category rather than a complete product specification.

Customers should check the actual size, bore, cutting designation, and other stated information relevant to their project.

Ignoring the Bore

A customer may focus on the 115mm size and overlook the 22.23mm bore.

Both specifications are stated on this product and should be considered when identifying the item.

Assuming Compatibility

The available product information does not identify a specific grinder or machine model.

Do not assume compatibility simply because the blade is described as a diamond blade or because it appears similar to another disc.

Ignoring the Stated Speed

The product packaging states 13,200 rpm.

This should be considered when checking whether the product information corresponds with the requirements of the equipment.

Choosing a Product Based on Appearance

The physical appearance of a cutting disc should not be used to infer technical specifications.

Use the information provided on the product packaging and confirm any additional requirements before purchase.

Related Search Terms

Customers may encounter different terminology when looking for diamond cutting products.

Relevant terms include:

• Diamond blade
• Diamond disc
• Diamond cutting disc
• 115mm diamond blade
• Diamond blade for grinder
• Diamond blade for angle grinder
• Diamond disc for grinder
• Grinder diamond blade
• Diamond cutting disc for concrete
• Concrete / Stone cutting disc

These terms can help customers locate products online, but they should not be treated as additional specifications for the FINDER blade unless those specifications are actually confirmed.

For example, although customers may search for diamond cutting disc for concrete, the product’s supplied common/local name is Concrete / Stone cutting disc. Other specific applications should not be assumed from search terms alone.

What About Other Diamond Cutting Disc Sizes?

Customers may encounter searches for products such as 9 inch diamond blade, 14 diamond blade, 4 inch diamond cutting disc, or other sizes.

The FINDER product shown here is identified as 115mm.

Therefore, customers looking for a different size should not assume that this product is the same size simply because it belongs to the same general product category.

If your project requires another size, confirm the required specification before ordering.

Why Size Matters in Product Selection

Size is one of the simplest ways to distinguish between cutting discs.

For this product, 115mm is the stated size. Customers should use that specification when identifying the item.

These should not be presented as product specifications simply because customers may use those phrases when searching for cutting discs.

This approach keeps the product information accurate while still helping customers understand what the listed product actually is.

Handling and Maintenance Information

The available product information does not provide detailed instructions concerning cleaning, storage, maintenance, lifespan, or environmental resistance.

Those details should therefore not be invented or presented as confirmed product features.

Before Purchase

Have the following information available:

• Required blade size
• Required bore
• Required cutting method
• Equipment requirements
• Required quantity

Before Use

Check the product specifications against the requirements of the equipment and project.

If any important specification is uncertain, obtain confirmation before proceeding.

Buying in Ghana

Customers looking for a diamond blade in Ghana can enquire through CETECH Ghana.

CETECH Ghana operates both online and physical stores in Ghana and supplies products to individual customers, businesses, contractors, technicians, institutions, commercial buyers, and industrial buyers where relevant.

Online Ordering

Customers who already know the product they need can make an online enquiry.

When ordering or enquiring about this product, useful identification details include:

FINDER MX Series Diamond Blade – 115mm, 22.23mm bore, Dry, 13,200 rpm.

Providing these details can help ensure that the requested product is clearly identified.

Offline Purchasing

Customers who prefer to purchase in person can visit a CETECH Ghana physical store.

This can be useful if you want to discuss your requirements before purchasing or need to enquire about availability.

Bulk Supply

Contractors, businesses, technicians, institutions, and other commercial buyers requiring several units can enquire about bulk supply.

For a bulk enquiry, provide:

• Product name
• Quantity required
• Required specifications
• Project requirements
• Supply or collection requirements

Availability should be confirmed before relying on a particular quantity.

Sourcing Support from CETECH Ghana

CETECH Ghana serves customers purchasing products for individual needs as well as larger projects.

For customers sourcing cutting accessories, providing the exact product name and specifications can make the procurement process clearer.

For example, instead of simply asking for a diamond disc, a buyer can specify:

FINDER MX Series Diamond Blade, 115mm, 22.23mm bore, Dry, 13,200 rpm.

This gives the supplier clear identifying information without relying on assumptions about the customer’s intended application.

Frequently Asked Questions

What is the FINDER MX Series Diamond Blade?

It is a diamond blade identified on the packaging as part of the FINDER MX Series.

What size is the blade?

The packaging states 115mm.

What is the bore size?

The packaging states 22.23mm.

Is the blade for dry cutting?

The packaging identifies the product as Dry.

What speed is stated on the packaging?

The stated speed is 13,200 rpm.

What material is stated on the packaging?

The packaging states Material: Diamond.

What is the common name for the product?

The supplied common/local name is Concrete / Stone cutting disc.

Is this a diamond cutting disc?

The packaging identifies the product as a Diamond Blade, and “diamond cutting disc” is a relevant product-category term used to describe this type of item.

Is it a diamond blade for an angle grinder?

The supplied keywords include “diamond blade for angle grinder,” but the available product information does not specify a particular angle-grinder model or confirm equipment compatibility. Compatibility should therefore be checked before purchase.

Is this a 9-inch diamond blade?

The packaging identifies this product as 115mm. No 9-inch specification is provided.

Is this a 14-inch diamond blade?

No 14-inch specification is provided. The stated product size is 115mm.

Can it cut metal?

The available product information does not state that this blade is intended for metal cutting. That application should therefore not be assumed.

Can it be used for tiles?

The available product information does not explicitly state that this particular blade is intended for tile cutting. Customers requiring a tile-cutting product should confirm the appropriate specification before purchasing.

Is it made in China?

Yes. The packaging states Made in China.

Can I buy it in Ghana?

Customers in Ghana can enquire about the product through CETECH Ghana’s online and physical stores, subject to availability.

Can I buy it in bulk?

Customers requiring multiple units can enquire about bulk supply.

FINDER MX Series Diamond Blade Buying Checklist

Before purchasing, confirm:

• Brand: FINDER
• Series: MX Series
• Product: Diamond Blade
• Size: 115mm
• Bore: 22.23mm
• Cutting designation: Dry
• Stated speed: 13,200 rpm
• Material stated: Diamond
• Origin stated: Made in China
• Quantity: Confirm the number of units required
• Equipment: Confirm compatibility before use

Buy the FINDER MX Series Diamond Blade from CETECH Ghana

The FINDER MX Series Diamond Blade is a 115mm diamond blade with a stated 22.23mm bore, Dry designation, and 13,200 rpm stated speed. The packaging identifies the material as Diamond and the origin as Made in China.

The product is also supplied under the common/local name Concrete / Stone cutting disc.

CETECH Ghana provides online and physical purchasing options for customers in Ghana and serves individual buyers, technicians, contractors, businesses, institutions, commercial customers, and other buyers where relevant.

For larger requirements, customers can enquire about bulk supply and sourcing support. Before purchasing, confirm that the blade’s stated specifications match the requirements of your equipment and project.