The FINDER MX Series Diamond Blade<\/strong> is a 115mm diamond blade<\/strong> identified on its packaging with a 22.23mm bore<\/strong>, Dry<\/strong> cutting designation, and a stated speed of 13,200 rpm<\/strong>. It is also supplied under the common customer name Concrete \/ Stone cutting disc<\/strong>.<\/p>\n\n\n\n For customers in Ghana sourcing this type of cutting disc, the most important step is to match the product’s stated specifications with the requirements of the intended equipment and project.<\/p>\n\n\n\n The product is identified on its packaging as the FINDER MX Series Diamond Blade<\/strong>.<\/p>\n\n\n\n The packaging provides the following information:<\/p>\n\n\n\n The product is also supplied using the common\/local name Concrete \/ Stone cutting disc<\/strong>.<\/p>\n\n\n\n These details provide the main information customers can use when identifying the product and comparing it with their project requirements.<\/p>\n\n\n\n The packaging identifies the blade as 115mm<\/strong>.<\/p>\n\n\n\n This is an important specification when purchasing a replacement or sourcing a cutting disc for a particular piece of equipment. Customers should confirm the required blade size before ordering rather than selecting a product based only on the general description of a diamond blade.<\/p>\n\n\n\n If your project specifically requires a 115mm blade, this stated dimension can be used when making an enquiry with CETECH Ghana.<\/p>\n\n\n\n The packaging also identifies the product with a 22.23mm<\/strong> measurement.<\/p>\n\n\n\n This specification should be checked when purchasing because the required bore is an important part of identifying the correct cutting disc for an intended setup.<\/p>\n\n\n\n If you are replacing an existing blade and are uncertain about the required bore, confirm the requirement before purchasing.<\/p>\n\n\n\n The packaging clearly identifies the product as Dry<\/strong>.<\/p>\n\n\n\n This provides a specific product detail for customers looking for a diamond blade with a dry cutting designation.<\/p>\n\n\n\n The available product information does not provide detailed operating instructions or explain every condition under which the blade should be used. Therefore, customers should not assume additional operating requirements that are not stated.<\/p>\n\n\n\n The packaging states 13,200 rpm<\/strong>.<\/p>\n\n\n\n This is part of the product information that should be considered when comparing the blade with the requirements of the equipment being used.<\/p>\n\n\n\n Customers should confirm that the product specifications are appropriate for their particular equipment before use.<\/p>\n\n\n\n The specifications on the packaging provide a straightforward way to identify this particular blade.<\/p>\n\n\n\n When enquiring about the item, customers can identify it as:<\/p>\n\n\n\n FINDER MX Series Diamond Blade \u2013 115mm, 22.23mm bore, Dry, 13,200 rpm.<\/strong><\/p>\n\n\n\n Providing these details can help reduce confusion where several cutting discs are available.<\/p>\n\n\n\n The packaging states Material: Diamond<\/strong>.<\/p>\n\n\n\n This information forms part of the product identification supplied by the manufacturer on the packaging.<\/p>\n\n\n\n No additional material composition or construction details are provided in the available product information, so those details should not be assumed.<\/p>\n\n\n\n The packaging states Made in China<\/strong>.<\/p>\n\n\n\n This is part of the product information displayed on the packaging and can be used when identifying the product.<\/p>\n\n\n\n Concrete \/ Stone cutting disc<\/strong> is the common\/local name supplied for this product.<\/p>\n\n\n\n Customers may use this term when asking for the product in a physical store or searching for it online.<\/p>\n\n\n\n Using both the product name and its specifications can make an enquiry more precise. For example, a customer can ask for the FINDER MX Series 115mm Diamond Blade with a 22.23mm bore<\/strong>.<\/p>\n\n\n\n This is more specific than simply requesting a diamond disc because it identifies the particular product specifications.<\/p>\n\n\n\n Different cutting discs can have different sizes and specifications.<\/p>\n\n\n\n When purchasing a replacement or sourcing products for a project, customers should therefore check the information required for their particular application instead of assuming that every diamond blade is interchangeable.<\/p>\n\n\n\n For this product, the key identifying details are:<\/p>\n\n\n\n Selecting a cutting disc should start with the requirements of the job and equipment.<\/p>\n\n\n\n The FINDER MX Series blade is identified as 115mm<\/strong>.<\/p>\n\n\n\n If your project requires a particular blade size, confirm that 115mm is the required specification before purchasing.<\/p>\n\n\n\n This is especially important when replacing an existing disc.<\/p>\n\n\n\n The stated bore is 22.23mm<\/strong>.<\/p>\n\n\n\n Check the required bore before ordering, particularly if you are sourcing a replacement blade.<\/p>\n\n\n\n If you are uncertain, consult the person responsible for the equipment or cutting work.<\/p>\n\n\n\n This product is marked Dry<\/strong>.<\/p>\n\n\n\n Customers looking for a product with this designation should take this information into account when comparing options.<\/p>\n\n\n\n The packaging gives a stated speed of 13,200 rpm<\/strong>.<\/p>\n\n\n\n This information should be checked against the requirements of the equipment before use.<\/p>\n\n\n\n Before placing an order, compare the product name and specifications with what your project requires.<\/p>\n\n\n\n A product should not be selected solely because it is described as a diamond blade.<\/p>\n\n\n\n The product may be relevant to customers who have identified a requirement for a diamond blade matching the specifications provided.<\/p>\n\n\n\n Potential buyers include:<\/p>\n\n\n\n The product may also be relevant to customers who specifically require a 115mm diamond blade<\/strong> or a blade with a 22.23mm bore<\/strong>.<\/p>\n\n\n\n Contractors may purchase cutting accessories as part of a larger project.<\/p>\n\n\n\n Before ordering several units, it is useful to confirm the required size, bore, cutting designation, and stated speed against the project requirements.<\/p>\n\n\n\n For bulk procurement, the exact quantity should also be established before making the order.<\/p>\n\n\n\n Technicians may need replacement cutting discs when working on different projects.<\/p>\n\n\n\n Providing the supplier with the product name and specifications can make it easier to identify the required item.<\/p>\n\n\n\n For this product, the main identifying information is the FINDER MX Series<\/strong>, 115mm<\/strong> size, 22.23mm<\/strong> bore, Dry<\/strong> designation, and 13,200 rpm<\/strong> stated speed.<\/p>\n\n\n\n Individual customers may need a cutting disc for a particular project.<\/p>\n\n\n\n If you are not certain which blade specification is required, confirm the requirement before purchasing.<\/p>\n\n\n\n Customers may search online using phrases such as diamond blade for grinder<\/strong>, diamond blade for angle grinder<\/strong>, or diamond disc for grinder<\/strong>.<\/p>\n\n\n\n These phrases can be useful when searching for products, but the available information for this particular item does not specify a particular grinder model or explicitly establish compatibility with a particular machine.<\/p>\n\n\n\n Therefore, customers should confirm equipment compatibility before purchasing or using the blade.<\/p>\n\n\n\n A cutting disc’s product description alone does not necessarily provide every detail required to determine whether it is appropriate for a specific machine.<\/p>\n\n\n\n When sourcing a replacement, provide the equipment information and the product specifications available to you.<\/p>\n\n\n\n If you already know that your project requires a 115mm<\/strong> blade with a 22.23mm<\/strong> bore, those details can be included in your enquiry.<\/p>\n\n\n\n A good purchasing process begins with identifying the exact requirements.<\/p>\n\n\n\n Determine whether the project requires the FINDER MX Series Diamond Blade or another specification.<\/p>\n\n\n\n The product is 115mm<\/strong>.<\/p>\n\n\n\n Make sure this matches the required blade size.<\/p>\n\n\n\n The product has a stated 22.23mm<\/strong> bore.<\/p>\n\n\n\n Confirm that this matches the requirement of the intended equipment.<\/p>\n\n\n\n The packaging identifies the blade as Dry<\/strong>.<\/p>\n\n\n\n Make sure this matches the requirement of your project.<\/p>\n\n\n\n The packaging states 13,200 rpm<\/strong>.<\/p>\n\n\n\n Consider this specification when checking the product against the equipment requirements.<\/p>\n\n\n\n Determine how many units are needed before placing an order, particularly for a larger project.<\/p>\n\n\n\n Searching for \u201cdiamond blade\u201d provides a broad category rather than a complete product specification.<\/p>\n\n\n\n Customers should check the actual size, bore, cutting designation, and other stated information relevant to their project.<\/p>\n\n\n\n A customer may focus on the 115mm size and overlook the 22.23mm<\/strong> bore.<\/p>\n\n\n\n Both specifications are stated on this product and should be considered when identifying the item.<\/p>\n\n\n\n The available product information does not identify a specific grinder or machine model.<\/p>\n\n\n\n Do not assume compatibility simply because the blade is described as a diamond blade or because it appears similar to another disc.<\/p>\n\n\n\n The product packaging states 13,200 rpm<\/strong>.<\/p>\n\n\n\n This should be considered when checking whether the product information corresponds with the requirements of the equipment.<\/p>\n\n\n\n The physical appearance of a cutting disc should not be used to infer technical specifications.<\/p>\n\n\n\n Use the information provided on the product packaging and confirm any additional requirements before purchase.<\/p>\n\n\n\n Customers may encounter different terminology when looking for diamond cutting products.<\/p>\n\n\n\n Relevant terms include:<\/p>\n\n\n\n These terms can help customers locate products online, but they should not be treated as additional specifications for the FINDER blade unless those specifications are actually confirmed.<\/p>\n\n\n\n For example, although customers may search for diamond cutting disc for concrete<\/strong>, the product’s supplied common\/local name is Concrete \/ Stone cutting disc<\/strong>. Other specific applications should not be assumed from search terms alone.<\/p>\n\n\n\n Customers may encounter searches for products such as 9 inch diamond blade<\/strong>, 14 diamond blade<\/strong>, 4 inch diamond cutting disc<\/strong>, or other sizes.<\/p>\n\n\n\n The FINDER product shown here is identified as 115mm<\/strong>.<\/p>\n\n\n\n Therefore, customers looking for a different size should not assume that this product is the same size simply because it belongs to the same general product category.<\/p>\n\n\n\n If your project requires another size, confirm the required specification before ordering.<\/p>\n\n\n\n Size is one of the simplest ways to distinguish between cutting discs.<\/p>\n\n\n\n For this product, 115mm<\/strong> is the stated size. Customers should use that specification when identifying the item.<\/p>\n\n\n\n These should not be presented as product specifications simply because customers may use those phrases when searching for cutting discs.<\/p>\n\n\n\n This approach keeps the product information accurate while still helping customers understand what the listed product actually is.<\/p>\n\n\n\n The available product information does not provide detailed instructions concerning cleaning, storage, maintenance, lifespan, or environmental resistance.<\/p>\n\n\n\n Those details should therefore not be invented or presented as confirmed product features.<\/p>\n\n\n\n Have the following information available:<\/p>\n\n\n\n Check the product specifications against the requirements of the equipment and project.<\/p>\n\n\n\n If any important specification is uncertain, obtain confirmation before proceeding.<\/p>\n\n\n\n Customers looking for a diamond blade in Ghana<\/strong> can enquire through CETECH Ghana.<\/p>\n\n\n\n CETECH Ghana operates both online and physical stores in Ghana and supplies products to individual customers, businesses, contractors, technicians, institutions, commercial buyers, and industrial buyers where relevant.<\/p>\n\n\n\n Customers who already know the product they need can make an online enquiry.<\/p>\n\n\n\n When ordering or enquiring about this product, useful identification details include:<\/p>\n\n\n\n FINDER MX Series Diamond Blade \u2013 115mm, 22.23mm bore, Dry, 13,200 rpm.<\/strong><\/p>\n\n\n\n Providing these details can help ensure that the requested product is clearly identified.<\/p>\n\n\n\n Customers who prefer to purchase in person can visit a CETECH Ghana physical store.<\/p>\n\n\n\n This can be useful if you want to discuss your requirements before purchasing or need to enquire about availability.<\/p>\n\n\n\n Contractors, businesses, technicians, institutions, and other commercial buyers requiring several units can enquire about bulk supply.<\/p>\n\n\n\n For a bulk enquiry, provide:<\/p>\n\n\n\n Availability should be confirmed before relying on a particular quantity.<\/p>\n\n\n\n CETECH Ghana serves customers purchasing products for individual needs as well as larger projects.<\/p>\n\n\n\n For customers sourcing cutting accessories, providing the exact product name and specifications can make the procurement process clearer.<\/p>\n\n\n\n For example, instead of simply asking for a diamond disc, a buyer can specify:<\/p>\n\n\n\n FINDER MX Series Diamond Blade, 115mm, 22.23mm bore, Dry, 13,200 rpm.<\/strong><\/p>\n\n\n\n This gives the supplier clear identifying information without relying on assumptions about the customer’s intended application.<\/p>\n\n\n\n It is a diamond blade identified on the packaging as part of the FINDER MX Series<\/strong>.<\/p>\n\n\n\n The packaging states 115mm<\/strong>.<\/p>\n\n\n\n The packaging states 22.23mm<\/strong>.<\/p>\n\n\n\n The packaging identifies the product as Dry<\/strong>.<\/p>\n\n\n\n The stated speed is 13,200 rpm<\/strong>.<\/p>\n\n\n\n The packaging states Material: Diamond<\/strong>.<\/p>\n\n\n\n The supplied common\/local name is Concrete \/ Stone cutting disc<\/strong>.<\/p>\n\n\n\n The packaging identifies the product as a Diamond Blade<\/strong>, and \u201cdiamond cutting disc\u201d is a relevant product-category term used to describe this type of item.<\/p>\n\n\n\n The supplied keywords include \u201cdiamond blade for angle grinder,\u201d but the available product information does not specify a particular angle-grinder model or confirm equipment compatibility. Compatibility should therefore be checked before purchase.<\/p>\n\n\n\n The packaging identifies this product as 115mm<\/strong>. No 9-inch specification is provided.<\/p>\n\n\n\n No 14-inch specification is provided. The stated product size is 115mm<\/strong>.<\/p>\n\n\n\n The available product information does not state that this blade is intended for metal cutting. That application should therefore not be assumed.<\/p>\n\n\n\n The available product information does not explicitly state that this particular blade is intended for tile cutting. Customers requiring a tile-cutting product should confirm the appropriate specification before purchasing.<\/p>\n\n\n\n Yes. The packaging states Made in China<\/strong>.<\/p>\n\n\n\n Customers in Ghana can enquire about the product through CETECH Ghana’s online and physical stores, subject to availability.<\/p>\n\n\n\n Customers requiring multiple units can enquire about bulk supply.<\/p>\n\n\n\n Before purchasing, confirm:<\/p>\n\n\n\n The FINDER MX Series Diamond Blade<\/strong> is a 115mm diamond blade with a stated 22.23mm bore<\/strong>, Dry<\/strong> designation, and 13,200 rpm<\/strong> stated speed. The packaging identifies the material as Diamond<\/strong> and the origin as Made in China<\/strong>.<\/p>\n\n\n\n The product is also supplied under the common\/local name Concrete \/ Stone cutting disc<\/strong>.<\/p>\n\n\n\n CETECH Ghana provides online and physical purchasing options for customers in Ghana and serves individual buyers, technicians, contractors, businesses, institutions, commercial customers, and other buyers where relevant.<\/p>\n\n\n\n For larger requirements, customers can enquire about bulk supply and sourcing support. Before purchasing, confirm that the blade’s stated specifications match the requirements of your equipment and project.<\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"featured_media":52337,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[1323],"product_tag":[12490,12491,12500,12499,12496,12494,12492,12493,12498,12495,12497],"class_list":["post-50759","product","type-product","status-publish","has-post-thumbnail","product_cat-grinding-wheels-points","product_tag-4-5-inch-cutting-disc","product_tag-4-5-inch-diamond-disc","product_tag-abrasive-disc","product_tag-angle-grinder-disc","product_tag-concrete-cutting-disc","product_tag-cutting-blade","product_tag-diamond-cutting-disc","product_tag-diamond-disc","product_tag-grinder-disc","product_tag-masonry-cutting-disc","product_tag-metal-cutting-disc","first","instock","shipping-taxable","purchasable","product-type-simple"],"yoast_head":"\nProduct Overview<\/h3>\n\n\n\n
\n
115mm Diamond Blade<\/h3>\n\n\n\n
22.23mm Bore<\/h3>\n\n\n\n
Dry Cutting Designation<\/h3>\n\n\n\n
Stated Speed of 13,200 rpm<\/h3>\n\n\n\n
Understanding the Product Specifications<\/h2>\n\n\n\n
Product Identification<\/h3>\n\n\n\n
Material Stated on the Packaging<\/h3>\n\n\n\n
Made in China<\/h3>\n\n\n\n
Concrete \/ Stone Cutting Disc<\/h2>\n\n\n\n
Why Product Identification Matters<\/h3>\n\n\n\n
\n
Choosing the Right Cutting Disc<\/h2>\n\n\n\n
Check the Size<\/h3>\n\n\n\n
Check the Bore<\/h3>\n\n\n\n
Check the Cutting Designation<\/h3>\n\n\n\n
Check the Stated Speed<\/h3>\n\n\n\n
Confirm the Product<\/h3>\n\n\n\n
Who May Need the FINDER MX Series Diamond Blade?<\/h2>\n\n\n\n
\n
Contractors<\/h3>\n\n\n\n
Technicians<\/h3>\n\n\n\n
Individual Customers<\/h3>\n\n\n\n
Diamond Blade for Grinder Searches<\/h2>\n\n\n\n
Why Compatibility Should Be Confirmed<\/h3>\n\n\n\n
Buying the Product for a Project<\/h2>\n\n\n\n
Step 1: Identify the Required Blade<\/h3>\n\n\n\n
Step 2: Confirm the Size<\/h3>\n\n\n\n
Step 3: Confirm the Bore<\/h3>\n\n\n\n
Step 4: Check the Cutting Designation<\/h3>\n\n\n\n
Step 5: Check the Stated Speed<\/h3>\n\n\n\n
Step 6: Confirm Quantity<\/h3>\n\n\n\n
Common Buying Mistakes<\/h2>\n\n\n\n
Buying Only by the Product Category<\/h3>\n\n\n\n
Ignoring the Bore<\/h3>\n\n\n\n
Assuming Compatibility<\/h3>\n\n\n\n
Ignoring the Stated Speed<\/h3>\n\n\n\n
Choosing a Product Based on Appearance<\/h3>\n\n\n\n
Related Search Terms<\/h2>\n\n\n\n
\n
What About Other Diamond Cutting Disc Sizes?<\/h2>\n\n\n\n
Why Size Matters in Product Selection<\/h3>\n\n\n\n
Handling and Maintenance Information<\/h2>\n\n\n\n
Before Purchase<\/h3>\n\n\n\n
\n
Before Use<\/h3>\n\n\n\n
Buying in Ghana<\/h2>\n\n\n\n
Online Ordering<\/h3>\n\n\n\n
Offline Purchasing<\/h3>\n\n\n\n
Bulk Supply<\/h3>\n\n\n\n
\n
Sourcing Support from CETECH Ghana<\/h2>\n\n\n\n
Frequently Asked Questions<\/h2>\n\n\n\n
What is the FINDER MX Series Diamond Blade?<\/h3>\n\n\n\n
What size is the blade?<\/h3>\n\n\n\n
What is the bore size?<\/h3>\n\n\n\n
Is the blade for dry cutting?<\/h3>\n\n\n\n
What speed is stated on the packaging?<\/h3>\n\n\n\n
What material is stated on the packaging?<\/h3>\n\n\n\n
What is the common name for the product?<\/h3>\n\n\n\n
Is this a diamond cutting disc?<\/h3>\n\n\n\n
Is it a diamond blade for an angle grinder?<\/h3>\n\n\n\n
Is this a 9-inch diamond blade?<\/h3>\n\n\n\n
Is this a 14-inch diamond blade?<\/h3>\n\n\n\n
Can it cut metal?<\/h3>\n\n\n\n
Can it be used for tiles?<\/h3>\n\n\n\n
Is it made in China?<\/h3>\n\n\n\n
Can I buy it in Ghana?<\/h3>\n\n\n\n
Can I buy it in bulk?<\/h3>\n\n\n\n
FINDER MX Series Diamond Blade Buying Checklist<\/h2>\n\n\n\n
\n
Buy the FINDER MX Series Diamond Blade from CETECH Ghana<\/h2>\n\n\n\n