The 1L Ace Paint Automotive Refinish \u2013 NC Matt Black is a professional-use automotive refinish paint intended for spray application on suitable automotive refinishing surfaces. It is supplied in a 1L container and is specified for application with a 1.4\u20131.6 mm spray gun fluid tip at 40\u201345 psi<\/strong>, with 2\u20133 coats<\/strong> recommended and approximately 1\u20132 minutes flash-off between coats<\/strong>. The product is intended for professional automotive refinishing work where controlled spray application and appropriate workshop practices are required.<\/p>\n\n\n\n This product is for professional use only<\/strong>. Before use, the supplied instructions require users to refer to the Material Safety Data Sheet (MSDS). Spraying can expose workers to hazardous vapours, and the product information identifies potential inhalation toxicity as well as eye and skin irritation. Appropriate protective masks, gloves, and eye protection should be used, with adequate ventilation and suitable professional spray facilities.<\/p>\n\n\n\n Because this is a professional automotive refinish coating, safe handling and application are essential<\/p>\n\n\n\n The supplied product information specifically warns of potential hazards associated with inhalation, skin contact, and eye contact. It also identifies potential risks of reversible effects and harm to unborn children. The product should therefore be handled only by appropriately informed users who understand the relevant safety requirements.<\/p>\n\n\n\n Before spraying:<\/p>\n\n\n\n The product should not be applied to surfaces accessible to children.<\/p>\n\n\n\n For professional automotive refinish technicians, these precautions should form part of the normal preparation process rather than being treated as optional extras.<\/p>\n\n\n\n Automotive refinish paint is coating material used in the professional repair and refinishing of vehicle surfaces. It is applied as part of a controlled refinishing process in which the technician prepares the surface, selects the appropriate coating system, applies the coating using suitable spray equipment, allows the required flash-off and drying periods, and completes any subsequent finishing steps required by the coating system.<\/p>\n\n\n\n The term automotive refinish paint<\/strong> is therefore broader than simply “car paint.” It refers to products used within professional vehicle refinishing workflows.<\/p>\n\n\n\n Customers searching for automotive refinish coatings<\/strong>, automotive refinish products<\/strong>, automotive refinish paint<\/strong>, or automotive refinish system<\/strong> are often looking for products that can fit into a professional repair or refinishing operation.<\/p>\n\n\n\n The 1L Ace Paint Automotive Refinish \u2013 NC Matt Black should be used according to its supplied product instructions and the requirements of the complete refinishing system.<\/p>\n\n\n\n The product is identified as NC Matt Black<\/strong>, making the finish specification an important part of the product identity.<\/p>\n\n\n\n A matt-black refinish is selected when the required automotive finish calls for a non-gloss or matt black appearance. The final appearance, however, depends on the application process, substrate preparation, spray equipment, environmental conditions, and compatibility of the complete coating system.<\/p>\n\n\n\n Professional technicians should therefore avoid treating the paint itself as the only factor controlling the final result.<\/p>\n\n\n\n Good refinishing practice begins before the spray gun is filled.<\/p>\n\n\n\n The supplied packaging specifies:<\/p>\n\n\n\n Spray gun fluid tip:<\/strong> 1.4\u20131.6 mm The specified fluid-tip range gives the technician a defined starting point for setting up appropriate spray equipment.<\/p>\n\n\n\n The spray gun fluid tip affects how the coating is delivered onto the surface.<\/p>\n\n\n\n Using equipment outside the manufacturer’s stated range can affect application behaviour, so technicians should follow the supplied 1.4\u20131.6 mm specification rather than selecting a tip size arbitrarily.<\/p>\n\n\n\n The exact setup may also depend on the spray gun, coating conditions, operator technique, and other components of the refinishing system.<\/p>\n\n\n\n The supplied instruction specifies 40\u201345 psi at the gun<\/strong>.<\/p>\n\n\n\n Correct pressure is important for controlled spray application. A professional technician should set and verify pressure using appropriate equipment rather than relying only on assumptions about compressor pressure.<\/p>\n\n\n\n The pressure should be checked at the relevant point specified by the product instructions.<\/p>\n\n\n\n The product instructions specify 2\u20133 coats<\/strong>.<\/p>\n\n\n\n Applying multiple coats allows the technician to build the coating progressively rather than attempting to achieve the entire result with one heavy application.<\/p>\n\n\n\n A professional spray process should maintain consistent gun movement, appropriate overlap, suitable spray distance, and controlled application between coats.<\/p>\n\n\n\n Avoid deliberately applying excessive material in an attempt to obtain faster coverage. The coating system should be allowed to flash off as specified before the next coat.<\/p>\n\n\n\n The supplied product information specifies approximately 1\u20132 minutes flash-off between coats<\/strong>.<\/p>\n\n\n\n Flash-off is the period allowed between coats for the coating to release volatile components sufficiently before another coat is applied.<\/p>\n\n\n\n This timing is important because immediately applying another coat without allowing the required flash-off can affect the application process and final finish.<\/p>\n\n\n\n At the same time, technicians should work within the conditions specified by the manufacturer’s instructions and MSDS. Workshop temperature, airflow, humidity, equipment, and application conditions can affect coating behaviour.<\/p>\n\n\n\n The stated 1\u20132 minute flash-off period should therefore be treated as the supplied product guideline rather than a reason to ignore other technical instructions.<\/p>\n\n\n\n The product information provides three useful drying stages:<\/p>\n\n\n\n These stages describe different points in the drying process and should not be treated as interchangeable.<\/p>\n\n\n\n Touch dry indicates that the surface has reached a stage where it is dry to the touch under the stated conditions.<\/p>\n\n\n\n This does not mean that the coating has reached its final service condition.<\/p>\n\n\n\n Avoid treating a touch-dry vehicle surface as fully cured or ready for normal use simply because the surface no longer feels wet.<\/p>\n\n\n\n The supplied information gives approximately 6\u20138 hours<\/strong> as the handleable stage.<\/p>\n\n\n\n This is a later stage than touch dry, but appropriate care should still be taken when handling or moving a freshly refinished component or vehicle.<\/p>\n\n\n\n The supplied product information states overnight<\/strong> for entering the coating into service.<\/p>\n\n\n\n Professional workshops should allow the recommended period before returning the refinished vehicle or component to normal service.<\/p>\n\n\n\n Actual drying behaviour can be influenced by application and environmental conditions, so technicians should follow the complete product documentation.<\/p>\n\n\n\n The quality of an automotive refinish depends heavily on preparation.<\/p>\n\n\n\n Before spraying the Ace Paint Automotive Refinish \u2013 NC Matt Black, the technician should ensure that the substrate is appropriately prepared for the coating system being used.<\/p>\n\n\n\n Surface preparation can involve cleaning, removal of contaminants, suitable preparation of the existing finish, and other steps required by the complete automotive refinishing system.<\/p>\n\n\n\n The supplied product information does not provide a complete substrate-preparation procedure or identify every compatible primer, undercoat, thinner, hardener, or ancillary coating. Those details should therefore be confirmed from the applicable technical documentation before use.<\/p>\n\n\n\n Do not introduce unverified materials into the system simply because they are commonly used with another automotive paint.<\/p>\n\n\n\n Automotive refinishing is highly dependent on application technique.<\/p>\n\n\n\n A professional technician can control factors such as:<\/p>\n\n\n\n These factors work together to determine how the coating behaves during application.<\/p>\n\n\n\n The Ace Paint product information specifically identifies the recommended fluid-tip size, gun pressure, number of coats, flash-off period, and drying stages. Following those instructions gives the technician a clear framework for application.<\/p>\n\n\n\n A 1L automotive refinish paint product can be relevant to professional workshops and technicians carrying out vehicle refinishing work.<\/p>\n\n\n\n Potential commercial users include:<\/p>\n\n\n\n The exact application should always be determined by the coating system and technical documentation rather than assuming that every automotive surface or repair situation is automatically suitable.<\/p>\n\n\n\n Professional automotive refinishing in Ghana can involve a wide range of vehicles, workshops, repair businesses, fleet operators, and independent technicians.<\/p>\n\n\n\n A workshop purchasing automotive refinish products needs to consider more than colour selection. Equipment compatibility, workshop ventilation, safe handling, surface preparation, application technique, drying time, storage, and the requirements of the complete coating system all matter.<\/p>\n\n\n\n For Ghanaian automotive businesses, this is particularly relevant when planning regular refinishing work. A product should fit the workshop’s actual equipment and professional process.<\/p>\n\n\n\n Where multiple vehicles or ongoing repair projects are involved, buyers may also need to consider purchasing quantities and maintaining appropriate stock levels without compromising storage requirements.<\/p>\n\n\n\n The supplied instructions specify that the product should be stored in a cool, dry, well-ventilated area<\/strong>, with containers tightly closed.<\/p>\n\n\n\n The product information also states that storage of flammable liquids should follow national regulations.<\/p>\n\n\n\n The container should be protected from unnecessary exposure to sunlight and should be kept sealed and protected from damage.<\/p>\n\n\n\n The supplied product instructions include the following precautions:<\/p>\n\n\n\n These requirements are particularly important in automotive workshops where spray equipment, electrical equipment, solvents, and other potentially hazardous materials may be present.<\/p>\n\n\n\n The supplied product information contains specific fire-fighting guidance.<\/p>\n\n\n\n For a fire involving the product, it recommends the use of:<\/p>\n\n\n\n The instructions specifically state to avoid using water<\/strong> for firefighting.<\/p>\n\n\n\n Workshops should maintain appropriate fire-safety procedures and ensure that personnel know how to respond to an incident involving flammable coating materials.<\/p>\n\n\n\n The correct emergency response should always follow the product’s current safety documentation and the workshop’s established emergency procedures.<\/p>\n\n\n\n The supplied incident-response instructions state that in the event of skin contact, the affected skin should be rinsed with water.<\/p>\n\n\n\n Because the product can cause skin irritation, preventing contact through appropriate protective gloves remains preferable to relying on post-exposure treatment.<\/p>\n\n\n\n If an exposure causes concerning symptoms or a person feels unwell, the supplied safety information advises seeking immediate medical attention.<\/p>\n\n\n\n Professional refinishing requires good workplace discipline.<\/p>\n\n\n\n The supplied instructions state:<\/p>\n\n\n\n These precautions help reduce avoidable exposure and contamination during automotive refinishing work.<\/p>\n\n\n\n The product instructions state that emissions to the environment are prohibited and that disposal of the product and its container should be entrusted to a suitably qualified hazardous-waste disposal unit.<\/p>\n\n\n\n Do not dispose of unused coating material or its container through ordinary methods unless permitted under the applicable disposal requirements.<\/p>\n\n\n\n Professional workshops should establish a suitable process for managing coating residues, contaminated materials, and empty containers in accordance with applicable requirements.<\/p>\n\n\n\n The 1L Ace Paint Automotive Refinish \u2013 NC Matt Black<\/strong> is intended for professional users rather than casual or unsupervised household application.<\/p>\n\n\n\n It can be relevant to:<\/p>\n\n\n\n Because the supplied instructions explicitly classify the product as FOR PROFESSIONAL USE ONLY<\/strong>, customers should not purchase it with the expectation that it is a general-purpose household paint.<\/p>\n\n\n\n A professional automotive refinishing operation is normally a system rather than a single product.<\/p>\n\n\n\n Depending on the specific repair, a workshop may work with preparation materials, primers, surfacers, base coatings, refinish coatings, application equipment, masking materials, and other supporting products.<\/p>\n\n\n\n The supplied keyword set includes terms such as automotive refinish spray booths<\/strong>, automotive refinish paint booths<\/strong>, automotive refinish masking tape<\/strong>, automotive refinish IR drying<\/strong>, and automotive refinish technician<\/strong>.<\/p>\n\n\n\n These terms represent related parts of the wider automotive refinishing environment, but they should not be interpreted as components included with this 1L paint product.<\/p>\n\n\n\n The product listing should remain clear about what is actually supplied.<\/p>\n\n\n\n The provided search terms include automotive refinish IR curing<\/strong>, automotive refinish IR<\/strong>, and automotive refinish IR drying<\/strong>.<\/p>\n\n\n\n Infrared drying is a separate drying technology used in some professional automotive refinishing environments. The supplied product information does not state that this paint includes an infrared curing system or that IR drying is required.<\/p>\n\n\n\n Therefore, buyers should not assume that an IR drying unit, IR curing capability, or other specialized equipment is included with the 1L paint.<\/p>\n\n\n\n Any drying method used should be compatible with the manufacturer’s technical requirements.<\/p>\n\n\n\n Customers searching for automotive refinish paint Ghana<\/strong>, automotive refinish products Ghana<\/strong>, or an automotive refinish supplier in Ghana<\/strong> should consider the product specification, application requirements, safety documentation, and intended professional use.<\/p>\n\n\n\n For the Ace Paint Automotive Refinish \u2013 NC Matt Black, important purchasing details include:<\/p>\n\n\n\n The supplied information also provides specific storage, fire-fighting, incident-response, and disposal instructions that professional buyers should review before use.<\/p>\n\n\n\n CETECH Ghana operates both online and physical offline stores in Ghana and supplies products to individual customers, businesses, contractors, technicians, institutions, commercial buyers, and industrial buyers where relevant.<\/p>\n\n\n\n For automotive businesses, purchasing from a supplier that understands professional product requirements can make procurement more straightforward.<\/p>\n\n\n\n CETECH Ghana can support relevant customers with:<\/p>\n\n\n\n Automotive workshops and businesses with recurring requirements can enquire about quantities appropriate for their operations.<\/p>\n\n\n\n It is a 1L professional automotive refinish paint identified as Ace Paint Automotive Refinish \u2013 NC Matt Black<\/strong>, intended for professional spray application according to the supplied product instructions.<\/p>\n\n\n\n The net contents are 1L<\/strong>.<\/p>\n\n\n\n The supplied instructions specify a 1.4\u20131.6 mm<\/strong> spray gun fluid tip.<\/p>\n\n\n\n The stated pressure at the gun is 40\u201345 psi<\/strong>.<\/p>\n\n\n\n The supplied application instructions specify 2\u20133 coats<\/strong>.<\/p>\n\n\n\n The stated flash-off period is approximately 1\u20132 minutes between coats<\/strong>.<\/p>\n\n\n\n The supplied information states approximately 1\u20132 hours to touch dry<\/strong>, 6\u20138 hours to become handleable<\/strong>, and overnight before entering service<\/strong>.<\/p>\n\n\n\n The product is explicitly marked FOR PROFESSIONAL USE ONLY<\/strong>. Users should refer to the MSDS before application and follow the stated safety precautions.<\/p>\n\n\n\n The supplied instructions recommend protective gloves, masks, and glasses, together with appropriate precautions against inhalation and skin or eye contact.<\/p>\n\n\n\n Store it in a cool, dry, well-ventilated area with the container tightly closed. Keep it away from heat, sparks, hot surfaces, and unnecessary sunlight exposure, and follow applicable requirements for flammable-liquid storage.<\/p>\n\n\n\n The supplied fire-fighting guidance recommends alcohol-resistant foam, CO\u2082, or powders and states that water should be avoided.<\/p>\n\n\n\n The supplied instructions state that disposal should be entrusted to a suitably qualified hazardous-waste disposal unit.<\/p>\n\n\n\n Before purchasing or applying the 1L Ace Paint Automotive Refinish \u2013 NC Matt Black, confirm:<\/p>\n\n\n\n The 1L Ace Paint Automotive Refinish \u2013 NC Matt Black<\/strong> is a professional automotive refinish coating specified for controlled spray application using a 1.4\u20131.6 mm fluid tip at 40\u201345 psi<\/strong>, with 2\u20133 coats<\/strong>, approximately 1\u20132 minutes flash-off between coats<\/strong>, and stated drying stages from touch dry through overnight service readiness. Its professional-use classification makes correct workshop procedures, protective equipment, ventilation, storage, fire safety, and MSDS review essential.<\/p>\n\n\n\n For automotive refinish technicians, body shops, vehicle repair businesses, fleet operators, and other professional buyers in Ghana, CETECH Ghana provides online and offline purchasing options together with relevant sourcing, consultation, and supply support.<\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"featured_media":0,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[22],"product_tag":[],"class_list":["post-48601","product","type-product","status-publish","product_cat-uncategorized","first","instock","shipping-taxable","purchasable","product-type-simple"],"yoast_head":"\nImportant Safety Information Before Use<\/h2>\n\n\n\n
\n
What Is Automotive Refinish Paint?<\/h2>\n\n\n\n
NC Matt Black for Automotive Refinishing<\/h2>\n\n\n\n
Recommended Spray Gun Setup<\/h2>\n\n\n\n
Pressure at the gun:<\/strong> 40\u201345 psi
Equivalent pressure:<\/strong> approximately 0.055\u20130.063 in. as stated in the supplied product information<\/p>\n\n\n\nWhy the Fluid Tip Matters<\/h3>\n\n\n\n
Why Gun Pressure Matters<\/h3>\n\n\n\n
Recommended Application: 2\u20133 Coats<\/h2>\n\n\n\n
Flash-Off Between Coats<\/h2>\n\n\n\n
Drying Times<\/h2>\n\n\n\n
\n
Touch Dry \u2013 1\u20132 Hours<\/h3>\n\n\n\n
Handleable \u2013 6\u20138 Hours<\/h3>\n\n\n\n
Into Service \u2013 Overnight<\/h3>\n\n\n\n
Preparing for Professional Automotive Refinishing<\/h2>\n\n\n\n
Why Professional Spray Application Matters<\/h2>\n\n\n\n
\n
Automotive Refinish Applications<\/h2>\n\n\n\n
\n
Automotive Refinish in Ghana<\/h2>\n\n\n\n
Storage Requirements<\/h2>\n\n\n\n
Storage Precautions<\/h3>\n\n\n\n
\n
Fire Safety<\/h2>\n\n\n\n
\n
What to Do After Skin Contact<\/h2>\n\n\n\n
Workplace Hygiene<\/h2>\n\n\n\n
\n
Environmental and Disposal Considerations<\/h2>\n\n\n\n
Who Should Buy This Product?<\/h2>\n\n\n\n
\n
Automotive Refinish Products and Workshop Equipment<\/h2>\n\n\n\n
Understanding Automotive Refinish IR and IR Drying<\/h2>\n\n\n\n
Buying Automotive Refinish Paint in Ghana<\/h2>\n\n\n\n
\n
Why Buy from CETECH Ghana?<\/h2>\n\n\n\n
\n
Frequently Asked Questions<\/h2>\n\n\n\n
What is Ace Paint Automotive Refinish NC Matt Black?<\/h3>\n\n\n\n
How much product is in the container?<\/h3>\n\n\n\n
What spray gun fluid tip should be used?<\/h3>\n\n\n\n
What pressure should be used?<\/h3>\n\n\n\n
How many coats are recommended?<\/h3>\n\n\n\n
How long should I wait between coats?<\/h3>\n\n\n\n
How long does the paint take to dry?<\/h3>\n\n\n\n
Can anyone use this automotive paint?<\/h3>\n\n\n\n
What protective equipment is recommended?<\/h3>\n\n\n\n
How should the paint be stored?<\/h3>\n\n\n\n
What should be used if there is a fire?<\/h3>\n\n\n\n
How should the product and container be disposed of?<\/h3>\n\n\n\n
Final Buyer Checklist<\/h2>\n\n\n\n
\n